eZr™ Intra-oral Adjustment and Polishing for Zirconia and Lithium Disilicate.
eZr™ is a three-step diamond polishing system for the processing of zirconium oxide and lithium disilicate.
The grinders and polishers are ideal for adjusting and correcting chairside restorations such as inlays, onlays, veneers and crowns. eZr™ produces a high gloss finish on zirconia, the polishers have a long life, and in combination with a high material removal rate, allow for an economic and fast processing system to get to glossy in seconds, without polishing paste.
- Enables easy and safe adjustment for zirconia and lithium disilicate.
- Proprietary diamond impregnated polisher reduces possibility of chipping and microfracturing.
- Provides an unparalleled smoothly polished occlusal surface, eliminating abrasiveness to opposing dentition.
- Prevents overheating that could lead to premature failure.
- Eliminates the need for polishing paste, reducing overall cost per procedure.
"Research tells us that zirconia is not over-abrasive to opposing dentition so long as it is polished to smooth. With all the other kits, there are still visible bur marks after polishing. The eZr™ system is the only one I’ve tried that polishes zirconia to smooth!" - Todd Brower, DDS - Holland, MI
GARFPZC030
11.45 mm height
11.45 mm width (at widest point)
20.71 mm length
GARFPZC010
4.1 mm height
4.1 mm width (at widest point)
25.95 mm length
GARFPZM010 (not in kit)
3.43 mm height
3.43 mm width (at widest point)
25 mm length
GARFPZM020
4.55 mm height
4.55 mm width (at widest point)
25 mm length
GARFPZM030
9.99 mm height
9.99 mm width (at widest point)
20.66 mm length
GARFPZM040
6.37 mm height
6.37 mm width (at widest point)
24.38 mm length
GARFPZF010 (not in kit)
3.43 mm height
3.43 mm width (at widest point)
25 mm length
GARFPZF020
4.55 mm height
4.55 mm width (at widest point)
25 mm length
GARFPZF030
9.99 mm height
9.99 mm width (at widest point)
20.66 mm length
GARFPZF040
6.37 mm height
6.37 mm width (at widest point)
24.38 mm length
